A Better Security System
With the state of the art interactive services available courtesy of Systems by Design, the possibilities are virtually endless. Have you ever wondered whether or not you turned out your lights after you have departed from your residence?
With interactive services, your troubles are over. This system will alleviate any apprehensions that you may have about whether you turned out your lights, locked the door, armed the security system, or even shut the garage door.
Take this scenario, you are going out of town for an extended duration, but you forgot to turn down the thermostat for optimal energy efficiency. Just retrieve your smart phone from your pocket, access your system from a simple application or “phone app”, and turn down the thermostat to whatever temperature you feel is suitable for your particular climate. In these modern times, saving energy means saving money.
Here is another situation where you are away from your place of residence or even your vacation home and you would like to check on your home or property. You are just one click away via the very same phone app that you previously used to turn down the thermostat, simply by viewing a real-time live video feed of your property right on your cell phone, on the office computer, or even a laptop from the comfort and confines of your own bed.
- With Interactive Services customers can:
- Arm or disarm their system remotely
- Watch live or recorded video from their security cameras
- See any activity at their property in real-time
- See which doors and windows have been opened / closed
- Create custom and convenient automatic light schedules as part of a morning routine
- Remotely lock doors from anywhere in the world
- Access a complete, searchable system event histroy online
- Customers can find out immediately when.
- Their kids get home from school
- The housekeeper arrives and leaves
- The dog walker takes the dog out
- A neighbor comes over to water plants or feed their pets
- The garage door is left open
- There's flooding or a water leak in the basement
- The liquor cabinet is opened
- Their security systems is disarmed (and who disarmed it)
- Some one attempts to log into their account.
One Platform, Multiple Solutions
WIRELESS COMMUNICATIONS. Unlike most security systems, Ours is 100% wireless and doesn't need a phone line,LAN line or Internet connection to communicate signals to an emergency response center. Communicating through a GSM network, Our systems are not susceptible to power outages or lines being cut.
VIDEO. Our Video Monitoring feature lets customers see what's going on when they are away, from any web-enabled computer or mobile device. With Our Video Monitoring, customers can use cameras inside to check up on kids, pets, and visitors, or point them outside to see activity on or around a home or business property.
emPOWER.With emPower, customers can have remote control and intelligent automation of the lights, thermostats, appliances and door locks at their home or business, giving them the ability to make smarter energy decisions more conveniently. Whether they want to conserve more energy or have more control and insight into the activity in their home or business, emPower is the solution.
TWO-WAY VOICE. With the industry leading, wireless 2-way voice solution, customers can have all the benefits of traditional 2-way emergency voice service and still eliminate your landline phones, allowing you to save money without sacrificing security.
Tips
Arming - Away Mode
- Close all protected doors and windows.
- Enter your 4 or 6 digit user code to arm the system, or Press the [EXIT] button.
Disarming
- When you enter the protected area through one of the designated Entry/Exit doors, the keypad control will sound a continuous tone for the duration of the entry delay time, or until you enter a valid code. The armed icon will go off and the tone will stop. The security system is now DISARMED.
System Reset
- Press [*]-[7]. Resets have now been performed.
- If the keypad begins beeping, the reset did not execute properly. Enter your code to silence the keypad. Wait a few minutes and repeat step 2 to attempt another reset. If the keypad still beeps after repeated attempts, please contact your installer.
Arming - Stay Mode
- Close all protected doors and windows.
- Enter your 4 or 6 digit user code., or Press the [STAY] key.
- To toggle from a “delayed entry” mode to an “Instant” mode, press the [STAY] key again.
Viewing Alarm Memory
- Press [r]-[3]. The zone(s) that created the last alarm will be displayed along with the alarm icon flashing on the keypad.
- The ALARM MEMORY feature will flash those zones that created alarms and will display steady those zones that were bypassed during the last alarm.
